Kuretake Projects
|
Happy Birthday Im-pressed Flower Card
By Alyea Fardosse
What You Need For This Project!
|
Instructions
1. Trim the light blue card and layer this onto the
dark blue card and stick it in the middle of the white
folded cardstock using any ZIG 2-Way Glue pen.
2. Peel off three Im-pressed Flowers and stick them
on the light blue cardstock, next peel off 4 large circle
light blue gems and place them inbetween the Impressed
Flowers.
3. Finish off by writing "Happy Birthday" across the
top of the card using the ZIG Memory System Writer.
|
* * * * * * * * * * * * * * * * *
Thank You Card
By Alyea Fardosse
What You Need For This Project!
|
Instructions
1. Trim yellow card to fit within the folded cardstock.
2. Trim the green card so it fits inside the yellow
card and then trim half of the purple card so it fits
half way on the green card, stick using the ZIG
2-Way Glue pen.
3. Take the checked yellow ribbon from the Assorted
Ribbon pack and stick around midway of the card,
using the ZIG Photo tape and now place 3 orange
gems in the middle of the ribbon 1 cm apart.
4. Cut out 3 green squares (3cm x 3cm), and decorate
these using Asterisk KurePunche's by layering the
small cut outs on top of the large cut out and finishing
these off by using the small gems, now fix these at the
bottom of the card using 3d dots.
5. Finish off by writing 'Thank you' on top off card
using the ZIG Painty pen.
|
* * * * * * * * * * * * * * * * *
Love Scrapbook Page
By Alyea Fardosse
What You Need For This Project!
KU100-913 and KU100-932 (2 shades of Red 12"x12" Scrapbook paper)
KU100-919 - White Paper stock
KPM47 KurePunch - Ring Heart
KPS16 KurePunch - Funky Heart
KU406-6 Small Red brads
KPS32 KurePunch -Tiny 3/16 circle
SBAR-1 Red Assorted Ribbon
SBGAS-1 Red Gems
MS3400/020 - Red Calligraphy
MS-10A/000 White Opaque Writer
Instructions
1.Use the light red Scrapbook paper as the main page.
2 Using the dark red paper cut two rectangles. One should be 21cm by 15 cm the second should 9.5 cm by 15.5 cm, and stick these on to the main scrapbooking paper.
3.Using the large KPM47 Ring Heart KurePunch, punch out 9 hearts on white paper straight across the page leaving approximately 1cm gap between, cut around the white paper and adhere near the bottom of the page using Zig 2-Way Glue pen.
4. Using the checked ribbon from the assorted ribbon pack, stick across the top and the bottom of the white card.
5. Choose your desired picture and layer the picture on red paper leaving extra ½ cm space on the left side, now punch out 3 holes using KurePunch - KPS32 Tiny 3/16 circle on the left side of the red card, choose your desired ribbon and feed through these holes and tie a knot and cut off the excess ribbon, finish off by sticking clear gems in between the holes.
6. Layer this red card on white paper and trim around leaving extra 1cm space on the left side, now punch out small hearts on the left side of the white card using KPS16 KurePunch Funky Heart and stick this on the Scrapbook page.
7. Create the main heading using a ZIG Calligraphy pen MS3400, on white card, and layer this card on red card leaving 4cm space on left side, wrap the lace and the red ribbon around the title and stick on the top of the Scrapbook page.
8. Create your message using the opaque writer MS10-A, on red card and adhere where desired on the scrapbook page.
9. Complete your page by punching out the ring heart on dark red paper (5cm x 5cm) and layering this on light card and attaching this on the page using the square brads and Zig 2-Way glue.
* * * * * * * * * * * * * * * * *
Shopping Bag – In Bloom
By Lindsay Smith
What You Need For This Project!
ZIG Fabricolor (TC-4000)
ZIG Fabricolor (PFC-20)
Kuretake Brads
Felt
Hessien bag
- 1.Firstly, you must prepare your bag. Iron the bag on the appropriate setting for the fabric
- 2.Take your ZIG Textile/Fabricolor and draw on your main chosen design in the centre of the bag. Use the finer tip to draw the outline and the brush tip to fill in the colour
- 3.For your lettering, practice on a separate sheet of paper, and use the brush tip end to add your Brush Lettering.
- 4.For the leaves and part of the flower, take some pieces of felt and draw your outline using a ZIG Textile/Fabricolor marker. Then cut around your designs.
- 5.To adhere to your bag either use a strong fabric glue or for extra detail, take some Kuretake Brads and insert them into both fabrics.
- 6.To finish off your design, draw a border around your main piece and add Kuretake Flower Brads to compliment your ‘In Bloom’ flower bag.
7.Once you have completed your design, wait for it to dry and then set it by ironing directly over the top
To clean your bag, we advise that you give it a cool hand wash only.
* * * * * * * * * * * * * * * * *
Instructions
1.Trim your Green, Red and Cream 12”x12” Paper to fit the size of your square card.
2.Take KurePunch KPM29, punch out the design onto your piece of Vellum Paper, which will then act as your stencil for the base of your Christmas Tree.
- 3.Take your piece of foam and MS7700/065 and colour in a section of the foam. Then, take your stencil and place on top of your piece of cream paper and dab out the colour. Take your stencil away and you will see your design on your paper.
- 4.Do the same technique using KPM7 and the remaining Green ZIG Brushables to create your tree. Continue to dab out the ink to build up the colour and gradation effects.
- 5.To complete your Christmas Tree, take your Kuretake Red Self-Adhesive Gems (SBGAS-1) and place in the centre of each of your Green ‘Cheer-Up’ punch design.
- 6.To finish your card adhere everything together using PhotoTape for Scrapbooking or ZIG 2 Way Glue.
* * * * * * * * * * * * * * * * *
'Invitation' Text using ZIG Brushables
By Lindsay Smith
ZIG Brushables are great for all your Brush Lettering and to create various decorative motifs such as flowers, candles and even carrots! With its flexible two-toned tips, you can create some endless projects.
Instructions
1.Take a selection of your ZIG Brushable pens and remember to work with the side of the tip where you can create broad and fine lines, remember there is no need to be too cautious feel free to apply as much pressure to the tip as you like.
2.Practise using the pens by creating a flicking action before doing your lettering.
- 3.Use the lighter tip for your base lettering and accent off the rest of your lettering using the darker tip end.
Tip: The Brushables flexible two-tone tips are fantastic for your rubber stamping ideas. The tips easily glide along the surface of the stamp and enable you to create stamping projects using more than one colour as the individual pen enables you to eliminate 'one colour' stamp pads and provides more flexibility to your projects.
* * * * * * * * * * * * * * * * *
Happy Valentine's Day using the ZIG Calligraphy Blending CollectionBy Lindsay Smith
What You Need For This Project!
ZIG Calligraphy Blending Collection Set Heart and Flush
-
Kuretake Pink Self-Adhesive Gems
-
ZIG 2 Way Glue
Instructions
- 1. Trim both your 12”x12” Papers to the appropriate size to fit your cardstock. Do not stick to the card stock at this stage.
- 2.Take the smaller tip end of the MS3400/025 from the Heart set and write out your ‘Happy Valentines Day’ message in the centre of your ready cut Paper. Make sure you hold the pen at a 30 degree angle for this style of Calligraphy writing.
- 3.From the Heart set, take MS3400/208 and 026 and blend the darker 5.0mm tip to the lighter 5.0mm tip. To do this, hold the darker pen directly over the lighter tip, with both tips slightly touching without applying any pressure and watch how the darker ink flows directly into the other pen. This will only need to be done for a few seconds. You can either blend the colour at the tip ends or in the centre of the pen.
- 4.To create your two-toned flowers, hold the pen at a 45 degree angle and create an ‘s’ shape. Move your paper round to create each petal to make your flower – you do not need to move your wrist when doing this.
- 5.Once your flowers have been complete, use the finer tip of MS3400/208 to create your smaller flowers.
- 6.To create the border use MS3400/401 from your Flush set to create your border.
- 7.Once you are happy with design, mount your design to the darker trimmed paper and apply to your card using ZIG 2 Way Glue
- To finish off your card, take the Kuretake Pink Self-Adhesive Gem Accent Stickers and place in the centre of your larger flowers.
* * * * * * * * * * * * * * * * *
For other occasions, why not try out other ZIG Calligraphy Blending Collection Sets to suit your needs.
Please view these other ZIG Calligraphy project ideas for more inspiration:
‘Thanks’ Card using the ZIG Calligraphy Blending Collection Heart Set designed by Alyea Fardosse
‘Congratulations’ text using the ZIG Calligraphy Blending Collection Hope Set
